Skip to content
| Marketplace
Sign in
Visual Studio Code>Other>TapeoNew to Visual Studio Code? Get it now.
Tapeo

Tapeo

Preview

tapeo

|
2 installs
| (0) | Free
Build your first chip from VS Code, without the toolchain headache: edit Tapeo hardware projects, run the real chip tools on the server, see tool errors in the Problems panel, and learn with the AI Architect.
Installation
Launch VS Code Quick Open (Ctrl+P), paste the following command, and press enter.
Copied to clipboard
More Info

Tapeo

Tapeo for VS Code

From intent to tape-out, inside your editor.
Design chips with the AI Architect, run the real EDA flow, see tool errors on the right line, and apply the Architect's fixes, on the same projects as tapeo.net.

Marketplace version tapeo-cli on npm Documentation


Features

Feature What you get
🧭 New Design with the Architect Describe the hardware and choose Quick prototype or Guided design. The Architect asks a few clarifying questions, shows the requirements readiness (Confirmed, Assumed, Needs input) and its assumptions (which you can change), proposes design options, and shows the build plan; building pulls the generated RTL and testbench into your folder.
⚙️ Run the real flow Simulation, synthesis, timing, place and route, DRC, extraction, LVS, and ERC run on Tapeo's servers. Run everything, one stage, or a stage and every later one. The status bar follows the run.
🎯 Errors on the right line When a run ends, errors from Verilator, Icarus Verilog, Yosys, and OpenROAD/OpenSTA scripts appear in the Problems panel on the lines they name.
🛠️ The Architect beside your code Ask about your design. Answers stream into a side panel that shares the project's conversation with the browser. Review proposed changes as a diff, then apply them.
🔒 Safe sync Every push names the version it was based on. If the server copy changed, your edit is kept and the server copy is saved for comparison. Tool outputs are read-only.
🔌 FPGA boards For FPGA projects (Sipeed Tang Nano 9K and 20K, 1BitSquared iCEBreaker, Radiona ULX3S), the workflow builds and checks a bitstream, Program FPGA Board programs the connected board, and Open Serial Monitor shows its serial output.
📊 Results and goals Stage results, tool logs, and the goal report, each goal checked against a measured tool result.

Get started

  1. Run Tapeo: Connect to Server and choose Sign in with your browser. Check that the code matches and approve the device; VS Code finishes signing in. The token is kept in VS Code's secret storage.
  2. Open an empty folder and run Tapeo: New Design with the Architect. Or use Tapeo: Create Project for an empty project, or Tapeo: Pull Project Files for an existing one.
  3. Edit, then Tapeo: Push All Changes and Tapeo: Run Workflow. When the run ends, check the Problems panel, or open Tapeo: Open the Architect and ask what went wrong.

Tip: VS Code has no built-in SystemVerilog support. Install any SystemVerilog extension alongside Tapeo for syntax highlighting.

Commands

Open the Command Palette (Cmd/Ctrl+Shift+P) and type Tapeo.

Area Commands
Account Connect to Server · Sign Out
Projects New Design with the Architect · Create Project · Pull Project Files · Pull Tool Outputs (read-only) · Open Project in Browser
Files Show Local Changes · Push Current File · Push All Changes · Delete Current File on the Server
Runs Run Workflow · Show Workflow Runs · Show Run Details · Open a Tool Log · Show Goal Results · Show Tool Problems · Lint Design · Cancel Workflow
FPGA boards Program FPGA Board (needs openFPGALoader on your computer), Open Serial Monitor (macOS and Linux)
The Architect Open the Architect · Ask the Architect · Review Proposed Changes · Apply All Proposed Changes · Discard Proposed Changes

Settings

Setting Default Description
tapeo.serverUrl https://tapeo.net The Tapeo server. Use your own server's address if you self-host. Remote servers must use HTTPS.

Good to know

  • The Architect reads the server copy of your files. Push local edits before asking about them.
  • Image and PDF attachments for the Architect, the 2D/3D layout views, and the Evaluation editor are in the web app.
  • Problems are found by reading tool logs. Messages without a project file and line stay in the tool log.
  • This is an early release (0.x). Feedback is welcome through Send feedback in the web app.

Also available

  • Terminal: npm install -g tapeo-cli, then tapeo login. Same projects, same features.
  • Web: tapeo.net, with the full workspace including the layout views.
  • Contact us
  • Jobs
  • Privacy
  • Manage cookies
  • Terms of use
  • Trademarks
  • Your Privacy Choices
  • Consumer Health Privacy
© 2026 Microsoft