Concrete Contractors Estimator for VS Code
The take-off concrete contractors run before every pour, inside your editor. Enter the dimensions of a
slab, driveway, patio, continuous footing, round column or set of steps and get the volume in cubic
yards with waste, the ready-mix order rounded to the quarter yard, 80/60/40 lb bag counts, a rebar grid
or wire mesh count and a rough installed cost range. Then insert it into your job notes, bid or README
as a Markdown table.
The maths is the same estimator published on npm as
concrete-contractors-estimator.

Features
- Estimator panel:
Concrete Contractors: Open Estimator opens a live calculator with four shapes
(slab/driveway/patio, continuous footing, round column or pier, steps). Results update as you type.
- Cubic yards and ready-mix order: volume with a configurable waste allowance, rounded up to the
next 1/4 yard the way plants dispatch it, with a bags-vs-truck recommendation.
- Bag counts: 80 lb (0.60 cu ft), 60 lb (0.45 cu ft) and 40 lb (0.30 cu ft) premix bags.
- Rebar and mesh: grid bar count and linear feet at your spacing, 20 ft sticks to buy with 10% for
laps, or 5 x 10 ft wire mesh sheets.
- Rough installed cost: broom, colored, exposed aggregate or stamped finish, with optional tear-out.
- Insert as Markdown:
Concrete Contractors: Insert Concrete Estimate (Markdown Table) walks you
through the dimensions and writes the table at the cursor; the panel has Insert and Copy buttons.
- Private by design: no telemetry, no network requests, no accounts. The webview runs under a
strict Content Security Policy and only loads files bundled with the extension.
Usage
- Open the Command Palette (
Ctrl+Shift+P / Cmd+Shift+P).
- Run Concrete Contractors: Open Estimator, pick a shape and type the dimensions.
- Click Insert as Markdown table, or run Concrete Contractors: Insert Concrete Estimate from any
Markdown file (also on the editor right-click menu).
Example output for a 20 x 20 ft, 4 in slab:
| Item |
Value |
| Dimensions |
20 ft x 20 ft x 4 in |
| Area |
400 sq ft |
| Net volume |
133.33 cu ft |
| With 10% waste |
146.67 cu ft (5.43 cu yd) |
| Ready-mix order |
5.5 cu yd (recommended) |
| 80 lb bags |
245 |
| 60 lb bags |
326 |
| 40 lb bags |
489 |
| Rebar grid (18 in on center) |
14 + 14 bars, 560 linear ft |
| Rebar to buy (20 ft sticks, +10% laps) |
31 |
| Or wire mesh (5 x 10 ft sheets) |
9 |
| Rough installed cost (Broom finish) |
$2,400 to $4,000 |
Settings
| Setting |
Default |
Meaning |
concreteContractorsEstimator.wastePercent |
10 |
Waste allowance added to the net volume |
concreteContractorsEstimator.rebarSpacing |
18 |
Rebar spacing in inches on center (slabs) |
concreteContractorsEstimator.finish |
broom |
Finish used for the cost range (broom, colored, exposed, stamped) |
Figures are planning estimates, not a bid. Always confirm the order with your ready-mix supplier.
Development
npm run compile # syntax-check every script
npm test # unit tests for the volume, bag, rebar and cost maths
npm run screenshot # re-render images/screenshot.png with headless Chrome
npm run package # build the .vsix with @vscode/vsce
npm run sync-core copies the shared estimator from packages/npm/lib/index.js.
Links
Built and maintained by the team behind Concrete Contractors Phoenix,
a licensed Arizona concrete contractor for driveways, patios, stamped concrete, slabs and foundations.
License
MIT